How to Make Your own models paint booth

I will explain how to make a modelers paint booth for models, and crafts.

Difficulty: Moderately Easy

Instructions

Things You'll Need:

• You could build this out of cardboard,metal,wood.
• You will also some type of fan. a computer fan or some sort of small fan, and some flexable dryer ducting.
• You will also need some duck tape, glue, clothes pins and screws or nails.

1. The easyest will be get a cardboard box any size the bigger the better and tape it like you would ship something. Cut the front of the box out. Then cut a hole in the top of the box a little smaler then the fan you will be using, cut the front of the box out.

2. Then install the fan on top of the box, This will take the fumes out to the outside once you put the exguast outside.Then take the piece of cardboard you cut out of the front and make a box around the fan so you can install the ducting over the fan, you can use duct tape to secure the ducting to the cardboard over the fan.

3. Now make to small cuts on the top and in the back, and also the sides of the box so clothesline clips can fit so you can use paper on all sides to keep the box clean so it will hold the paper in the back and the sides you can change the paper as needed and it will keep the box clean. Now you have a models paint booth.
   You can also yous wood or metal to build this paint booth it will take a little more time and some extra materials.

Tips & Warnings

• Make sure the exhaust is place outside so the fumes go outside a well vented area. the fumes can be harmfull to you. Giving you a headache or worse.