How to Clean Mold Off Basement Walls With a Teaspoon of Bleach
Mold can cause an allergic reaction resulting in symptoms such as itchy eyes, runny nose and skin rash. When mold is detected on your walls, clean it immediately and take measures to prevent it from returning. Mold spores are found in the air and dust, but it only grows in areas where there is water or humidity in the air. Does this Spark an idea?
Things You'll Need
- 3 tsp. water
- Disposable rags
- Rubber gloves
- Mask
- Small spray bottle
- Goggles without side vents
- HEPA vacuum
- Bowl
Instructions
-
-
1
Mix 1 tsp. of bleach with 3 tsp. of water in a bowl. The ratio of bleach to water should be 1:3. Pour the mixture into a small spray bottle.
-
2
Put on a mask, goggles, and rubber gloves as well as old clothing.
-
-
3
Spray the bleach mixture on the mold. Let the solution sit on the mold for about 30 seconds, then wipe the mold off the wall using a towel. You can use an old rag that can be thrown away after use or a paper towel. Dispose of the towel immediately after using it.
-
4
Apply warm water to another towel and wipe the newly clean area, then spray the bleach solution on the wall again, and let it sit for 15 minutes. Wipe the area again with warm water on a clean towel. Dispose of the towel immediately after use.
-
5
Clean the wall area with a HEPA vacuum after the wall has dried to remove all remaining mold spores. Dispose of the HEPA vacuum bag immediately after you are done vacuuming. You do not want mold spores left in the area that can regrow mold or cause an allergic reaction to someone in your house.
-
6
Wash your clothes in a separate load of wash to avoid contaminating other clothing.
-
1
Tips & Warnings
To control air moisture in your house and help prevent mold from growing, consider using a dehumidifier.
