How to Replace a Built in Oven
Replacing an old or non-functioning built-in oven is not the daunting task it might appear to be. Whether the old unit is an electric unit or a gas one, it was made to fit into an existing space and secured by screws that are generally hidden behind trim pieces. Removing them, and the power connections, is a straightforward procedure but is best done with two people. Make certain to check local building codes in the event you may need a permit to perform this operation. Does this Spark an idea?
Other People Are Reading
Instructions
-
-
1
Remove the electrical power that supplies the unit by removing the fuse or shutting off the circuit breaker that feeds the unit. Even a gas oven will have an electrical connection to power the oven light and igniters. Shut off the gas supply if it is a gas oven being replaced.
-
2
Remove the screws holding the oven in place. If they cannot be seen, remove the screws holding any trim pieces in place and look there. Normally only four screws hold the oven in place.
-
-
3
Remove the oven door by removing the holding screws with a screwdriver.
-
4
Slide the old oven out far enough to access the electrical connections located behind the oven in the cabinet. Disconnect wiring from the oven and wall. One person should support the oven while the other disconnects the wires. If you have a gas oven, gently disconnect the flexible gas line from the oven with an adjustable wrench.
-
5
Remove the old oven. The new oven should come with it's own wires already attached and the wire nuts to fasten them.
-
6
Slide the new oven part way into the opening. Connect the wiring for the new oven. If the new oven is a gas unit, follow the manufacturer's directions to correctly connect the gas. Replace all flexible stainless steel gas line connectors, do not reuse the old ones.
-
7
Slide the new oven completely into the existing space. Install the screws to hold the oven in place. Install the oven door, if it's not already affixed to the new oven. Repair or add trim to fill in any gaps around the oven.
-
1
Tips & Warnings
Make certain the new oven is the same size as the old one to facilitate the installation. Check local building codes before undertaking the task.
Make sure the power, and the gas, are shut off. Make certain you feel comfortable and are knowledgeable about disconnecting and reconnecting the electrical wiring. If not, hiring an electrician is a good investment and may prevent serious injury or property damage.
