How to Clean Mold With Vinegar
If you've discovered a nasty mold problem, you may be tempted to get out the big guns. However, it isn't necessary to spend a lot of money on expensive, dangerous chemical products because most forms of mold can nearly always be removed with plain vinegar. Although it may seem like an old-fashioned folk remedy, vinegar really does work, and best of all, it's a green solution, perfectly harmless to the environment, people and pets. Does this Spark an idea?
Instructions
-
-
1
Fill a spray bottle with distilled white vinegar. The vinegar needs to be used full strength, so don't water it down.
-
2
Spray the vinegar lightly on the moldy area. Don't spray so much that it drips.
-
-
3
Leave the vinegar on the mold for at least an hour; then wipe the area with water and allow it to air dry. Be sure to wear rubber gloves. Vacuum the floor after you're finished to remove any mold spores that may have fallen.
-
4
Keep a spray bottle with a mixture of one part water and two parts white vinegar near your kitchen sink. Spray the solution on cutting boards, counter tops and other surfaces to prevent mold. This is also a good way to prevent mold from forming in the bathroom.
-
1
Tips & Warnings
If you have mold on clothing or fabric, add a splash of white vinegar to the wash water.
If you have a serious mold problem, wear not only rubber gloves, but a face mask with a filter. This is especially important if you have asthma or allergies. Make an attempt to remove the cause of the mold, including improving ventilation in the area. A serious mold problem may mean removing and replacing porous surfaces. Mold can be a serious health problem, so talk to a professional if you have concerns.
