How to Calibrate a Digiweigh Scale


Digiweigh produces digital scales for industrial, lab and consumer use. These scales utilize innovative technology for accurate readings and are used worldwide. However, the initial accuracy of the scale depends on its calibration. With a set of predetermined weights, this process can be done easily and quickly.

  • Place the scale in a location where there is no electrical interference. Sources of interference may include cell phones, cordless phones, Wi-Fi signals, Bluetooth devices or any other device using some sort of electric motor.

  • Make sure the scale is level on a flat surface. Also, be sure to use only stable surfaces, since any slight movement will alter the calibration.

  • Turn the scale off, then press and hold the "Mode" and "Tare" keys simultaneously. While holding "Mode" and "Tare," turn the power back on. Continue holding the two buttons until you see a series of numbers or a message that indicates that you may continue.

  • Place your calibration weights on the scale, then press the "Mode" button. A similar series of numbers should show, followed by a message that states "Pass" or "Fail."

  • If you see a "Fail" or error message, repeat the steps 1 through 4 as necessary until you see "Pass."

Tips & Warnings

  • If your Digiweigh scale consistently shows error messages or incorrect readings after calibration, you may need to contact Digiweigh ( for service. Digiweigh manufactures many scales, so this procedure may vary slightly from product to product. Refer to your scale's manual for exact instructions.


Promoted By Zergnet


You May Also Like

Related Searches

Check It Out

How to Build and Grow a Salad Garden On Your Balcony

Is DIY in your DNA? Become part of our maker community.
Submit Your Work!