How to Load Paper for Faxing in a Brother Intellifax 2800

Faxing with a Brother Intellifax 2800

Loading paper into the Brother Intellifax 2800 can be a little bit tricky if you do not have the manual or proper instructions. However, once you learn about the quirks of this particular machine, you'll discover that loading paper into this fax machine is a simple process that can be done in seconds with a few quick steps.

Instructions

1. Locate the spot to load the paper on the top of the fax machine. Make sure to adjust the movable plastic guides to fit the type of paper you are planning to use.

2. Get the stack of paper ready. According to the Brother Intellifax manual, this model can hold up to 200 sheets of paper at a time, so make sure the amount of paper you are loading is less than this amount. It is also a good idea to fan the paper, like you do a stack of cards, to avoid paper jams.

3. Locate the paper lever on the side of the plastic paper support on the top of the fax machine and press down on it. While pushing this paper lever down, insert the paper until all the paper is stacked below the paper mark on the machine.

Tips & Warnings

• Remember that the side of the paper that you wish to print on should be facing the front of the fax machine.

• It is important to note that in order to receive faxes, you must only use either letter, legal or A4 paper. Other paper sizes will not work properly. Also, if you are using legal or A4 paper to receive faxes, you must change the paper settings under the main menu options.

References

• Brother Intellifax 2800 Manual

Resources

• Brother Intellifax 2800 Manual
• Brother