The oil pan in your Lincoln Town car is an important part of the wet sump system used to cool your engine while driving. Periodically, you will have to drop the oil pan on a Lincoln Town car so you can perform the necessary maintenance to prevent sludge from building up and being drawn into the oil pumping system. The process is easy, dirty and will only take about 20 minutes of your time.
Things You'll Need
- Oil drain pan
- Socket set
- Paint scraper
Park your car on a level surface. The Lincoln Town car has a high enough suspension so you will not have to raise the car to drop the oil pan, but you can do so if you like.
Place the oil drain pan under the oil drain pan plug (located toward the front of the oil pan). Remove the oil drain plug by using a 11mm socket. Let the oil drain completely from the engine.
Unscrew the oil filter by hand and pull it from the engine. This will ensure that the oil pooled in the filter does not inadvertently drain through the engine while the oil pan is dropped.
Using your socket set, loosen the bolts attaching the oil pan to the engine block. Be careful to work from side to side, back to front as you loosen the bolts. Loosen all the bolts, and then remove them, again working from side to side and back to front so the release of pressure on the oil pan lip is even.
Gently pry between the lip of the oil pan and the engine block with a paint scraper until the pan begins to separate from the engine. Use both hands to pull the pan completely from the block and drop it. Be careful, even though you have drained the engine oil, there will still be oil in the pan.
Remove the oil gasket by using the paint scraper to peel it away from the metal. make sure that none of the old gasket remains on either the pan or the block, or it will interfere with how well the oil pan seals when you re-install it.
Tips & Warnings
- Before you begin, run your car engine for 10 minutes to warm up your oil so it drains easier.
- While warm oil drains faster, an engine that is still hot will have hot oil that could burn you as it drains. Do not begin this process immediately after driving your car, let it cool down, but not become cold, to prevent injury.
- Photo Credit guano.net
How to Remove an Oil Pan
You may want to remove the oil pan to gain access to the bearings without the need to remove the engine, fix...
How to Drop the Oil Pan in a Lincoln Navigator
The Lincoln Navigator is a full sized, four-door vehicle that has been produced by the Ford Motor Company since 1998. There are...
How to Reset the Change Oil Indicator on a 2005 Lincoln Town Car
The 2005 Lincoln Town Car utilizes Ford's Oil Minder system. This system analyzes the quality of your engine oil by considering mileage...
How to Get Engine Codes on a Lincoln Town Car
Diagnostic Trouble Codes (DTCs) are commonly referred to as engine codes. The codes are generated and stored in the vehicle's power train...
How to Change Automatic Transmission Fluid in a Lincoln Navigator
The following covers Lincoln Navigator models from 1998 through 2000. If you drive your Navigator in severe conditions, change the automatic transmission...
Lincoln Town Car Water Pump Removal
The engine overheating on a Lincoln Town Car is one of the main indications that the water pump may be malfunctioning. The...
How to Reset the Oil Change Light in a 2003 Lincoln Town Car
The 2003 Lincoln Town Car includes a maintenance indicator light to remind you to change your engine oil when it reaches the...
How to Change the Battery in a Lincoln Town Car
Ford has produced the Lincoln Town Car for decades. It is a full-sized, rear-wheel-drive, luxury sedan with a V8 engine. The approach...
How to Change a Tire on a Lincoln Town Car
If you need to change a tire on your Lincoln Town Car, there's no need to call AAA to come to your...