How to Troubleshoot Landscape Lighting


Landscape lights can be a scenic addition to your home, but there are times when one or all of the lights do not work. Knowing how to troubleshoot landscape lights will save you some frustration. Because landscape lights have a simple setup, you can find the problem and fix it quickly.

Things You'll Need

  • Screwdriver

All Lights Are Out

  • Check the transformer for power. Look at the circuit breaker to make sure it has not tripped. Make sure the transformer is still plugged into the outlet.

  • Inspect all of the cable between the lights and the transformer. Look for bare wires that might have shorted out the system, and make sure none of the wires have cuts in them.

  • Check the wire connections inside the individual lights. Sometimes these come loose. Locate the terminal connections (you may need to refer to the instruction manual) and reattach or tighten the wires where necessary.

One Light Is Dim or Out

  • If the bulb has a broken or burned-out filament, replace it.

  • If it does not look burned out, replace the bulb with a known good bulb. If it still does not light, the socket is bad. Replace the fixture.

  • Inspect the fixture housing for water or moisture buildup. Make sure the watertight fittings are not wet and are snugly connected.

Related Searches


Promoted By Zergnet



You May Also Like

Related Searches

Check It Out

22 DIY Ways to Update Your Home on a Small Budget

Is DIY in your DNA? Become part of our maker community.
Submit Your Work!