Things You'll Need:
- either pvc pipe
- duct tape
- green, red, or blue tape depending on the color of your lightsaber
-
Step 1
Saw your pvc pipe to about 3 feet, with enough room for a handle.
if you want a sturdier lightsaber, you can use carbon or aluminium tubing for the blade.
you can get these pieces at your local hardware store. -
Step 2
you can do a search on the internet on how to make a high quality hilt, or you can wrap duct tape around the length of your handle.
duct tape will look real, but a custom made hilt will be much better. -
Step 3
wrap your colored tape around the blade. this will give it the color and keep it from breaking as easily as i t would without it
if you hit hard enough, the blade will snap, so don't hit too hard! -
Step 4
if you want a double bladed lightsaber, like in the picture, cut the pipe to around 7 feet. wrap the middle six inches with duct tape or a custom made handle found off the internet.
