-
Step 1
The tools you will need are a spark plug socket, ratchet, extension, spark plug gap gauge, and a flat tip screwdriver.
-
Step 2
Remove the spark plug wire from the spark plug. Using a ratchet, socket, and extension, remove the spark plug.
-
Step 3
Get a new spark plug. Use a gap gauge to check the gap of the spark plug.
-
Step 4
Install your new spark plug. Always start by hand. Now put the ratchet on it. Put the spark plug wire back on.
-
Step 5
Now let’s change out the distributor cap. To find it, just follow the spark plug wires.
-
Step 6
There are two screws that you need to remove. Remove those at this time. Now remove the distributor cap.
-
Step 7
Remove one spark plug wire at a time and transfer it to the new distributor cap. If you need to replace the rotor, do it at this time.
-
Step 8
Put your distributor cap back on and you are done.
