How to Blue a Worn Rifle


Over time, the finish will wear off your rifle. You can get your rifle looking like new by bluing it yourself. You can purchase a bluing kit at any gun store. Bluing your rifle yourself will save you money and will allow you to get just the finish you want.

Things You'll Need

  • Steel wool
  • Alcohol
  • Degreaser
  • Clean cotton cloth
  • Small sponge
  • Gun blue
  • Remove the wooden stock from the rifle. This may require a little time. You want to be working with only metal and no wood. Some stocks come off with one large screw, some are a little more complicated.

  • Use the steel wool to rub off any rust spots. If there are any marks under the rust, work on them until the metal is completely smooth. Start rubbing the entire surface until it is free of any small nicks. Take it down to bare metal.

  • Clean your hands with alcohol, especially your fingertips. You do not want to leave a fingerprint anywhere on the surface.

  • Take a small bit of tissue and plug both ends of the barrel. Use the clean cloth with the degreaser and rub until the metal is clean. Rinse with warm water. Degrease again and rinse with warm water. Dry with a clean cloth and let stand for several minutes.

  • Clean your fingertips with alcohol one more time. Saturate the sponge in the gun bluing compound. Apply the bluing to your rifle using the same strokes you would use with a paintbrush. Continue until all the metal is covered. Let the bluing dry for 5 minutes then rinse the entire surface with warm water. Wipe the surface dry and let sit for 5 minutes.

  • Go over the surface of the rifle lightly with the steel wool. The finish may show some streaking. If so, repeat steps 3 through 5 until the finish meets your standards.

Tips & Warnings

  • The blueing kit can be bought at any gun store, and it will be much cheaper than a professional blueing.
  • The chemicals used here are toxic, so follow the instructions on the label.

Related Searches


  • Photo Credit Jupiterimages/Comstock/Getty Images
Promoted By Zergnet


You May Also Like

  • How to Use Gun Bluing

    Bluing is a protective coating for the metal parts of a gun. Bluing puts a finish on the metal while providing a...

  • How to Blue a Gun

    As guns age rust may form on the metal parts. This is unsightly, particularly with an antique gun, so some people decide...

  • Types of Gun Bluing

    Gun bluing is a traditional finish applied to firearms. Bluing helps protect the steel from corrosion and gives the metal a very...

  • Do it Yourself Gun Bluing

    Having a professional gunsmith blue a firearm or other metal can be expensive and rarely yields better results than you can achieve...

  • Gun Bluing Techniques

    Gun bluing is the process that imparts the rich blue-black finish to the metal parts of firearms. There are two methods of...

Related Searches

Check It Out

10 Delicious Game Day Eats That Rival the Game

Is DIY in your DNA? Become part of our maker community.
Submit Your Work!