How to Build a Model Oil Well

Save

The price of oil has spiked in recent years, attracting the attention of speculators and more conservative investors. But making a model of the moneymaking element of this industry is much easier than the issues faced by those who profit from it. It just takes a few simple tools and materials.

Things You'll Need

  • Black paint
  • Leftover window screen
  • Small strips of balsa wood
  • A small square of plywood for a base, perhaps a square foot
  • Dash of lichen and ballast for scenery
  • Hobby adhesive, such as Walthers Goo
  • Paint the plywood base an earth color matching the type of terrain you want your oil derrick to stand on.

  • Shake lichen or foam bits on the paint while it's wet to cement them down to simulate grass or shrubbery.

  • Sprinkle ballast or sand on the paint to simulate dirt or gravel around the derrick base.

  • Take the strips of balsa wood and cut several of them into smaller pieces to be used for the cross braces. Glue these together to make squares of various sizes. The larger squares will be used for the lower braces and the smaller ones will be used at the top.

  • Glue the legs of the derrick to the lowest and highest cross bracing squares to begin the structure. Use slightly thicker strips of balsa for the legs of the derrick. Then glue all of the other braces around the inside to complete the cross sections.

  • Glue small round or square balsa rods diagonally between each joint to simulate diagonal bracing. Cut four small blocks of balsa to simulate concrete piers and glue them onto the base.

  • Construct a small ladder separately and then glue it into one side of the derrick.

  • Cut four small blocks of balsa to simulate concrete piers and glue them onto the base.

  • Spray paint the entire derrick either black or gray to simulate steel, and allow to dry. Glue the structure onto the base on the balsa piers.

  • Cut a fence out of window screen and mount with balsa piers painted gray for a chain link fence.

Related Searches

References

  • Photo Credit http://www.flickr.com/photos/tm-tm/2606545505/
Promoted By Zergnet

Comments

You May Also Like

  • How to Build an Oil-Can Guitar

    The first oil-can guitars were made in Africa and were called ramkiekies. Today these are still the first instruments many folk musicians...

  • How to Make Oil Based Modeling Clay

    If you love to sculpt things out of clay, but want to be able to remodel your creations, oil-based modeling clay is...

  • How to Rig a Model Yacht

    Looking at the picture of the yacht you're modeling, you might wonder how you'll ever rig all those "ropes." You won't--you'll rig...

  • How to Build Model Tanks

    If you ever go to an International Plastic Modelers Society competition, you will find a tremendous number of tank and armor entries....

  • How to Clean a Miller Oil Furnace Model CMF80-PO

    Miller oil furnaces are high-efficiency units that use natural gas, propane gas or an oil burner substitution to power the unit and...

Related Searches

Check It Out

DIY Wood Transfer Christmas Ornaments

M
Is DIY in your DNA? Become part of our maker community.
Submit Your Work!