How to Connect Hi-Fi Speakers to your pc

This is a simple guide on how to connect old speakers to your pc the cost-effective way

Difficulty: Moderately Easy

Instructions

Things You'll Need:

• Copper Wiring
• Cutting Tools
• Installation Tape
• Hands...

1. 
    

   The lead that runs from your main speaker (the one with the on button) to your second speaker needs to be cut closest to the second speaker. ( throw the second speaker into the bin if you wish)
   Then with the wire that is now loose split and strip off to show about a half inch of copper on each.

2. 
    

   connect that either to the two holes in the back of the speaker (doesnt matter which) or cut the wire on the speaker and attach the copper to the copper on that (make sence?) but if the holes with the little catches are there then use that must must!

3. 
    

   If you want to add another HIFI speaker then you need some copper wiring and you need to connect that into the back of the second speaker then wrap it to the same lead that comes from the main speaker, i used a connector block as it was tidier, i did the same again with a third speaker but i am just greedy...

4. 
    

   Then you should be done really, it's actually very simple and then you should be able to annoy those neighbours.

Tips & Warnings

• Be careful to make sure all power is disconnected.