-
Step 1
The first step is to choose a cock ring. They are available in different colors, styles, and shapes. The one that works best for most beginners is a Continuous, O style ring. These have a lot of stretch and can accommodate different sizes. As well they are relatively inexpensive going for around $8.00 for a pack of 4. If you are going for shared pleasure you can choose a cock ring that vibrates and has clitoris stimulators.
-
Step 2
If you are very large you may want to look at the size of the o style cock ring. If it appears too small and too tight of a fit you may need to stretch it out by placing it around a large bottle for a few hours. Keep in mind that you want a tight fit but not so tight as to be dangerous or uncomfortable.
-
Step 3
When you place the o ring on your cock you want it to be semi erect( meaning not fully hard, but not limp as a noodle either).
-
Step 4
thoroughly lube your cock and testicles. You need to be able to easily slide the ring into place.
-
Step 5
Follow the package directions for putting the ring on. Each style can have a different method of putting it in place. Most rubber o rings require that you push one testicle through the ring and then the other. Once both testicles are in then you pull the cock shaft inside as well. Make certain to read the package directions completely. You do not want to put it on incorrectly or to tight and have problems removing it. Cock rings can prolong ejaculation and be a fun sex toy but you don't want to end up in the ER having it removed because it wasn't properly put in place. Not a very attractive ending to a fun evening.
