×
Back Button

How to Program a Chamberlain Garage Remote for the Elite Series Logic 3.0

Megan Mattingly-Arthur

Manufactured by the Chamberlain Group, the Liftmaster Elite series is a line of popular belt-drive, chain-drive and screw-drive garage door openers. Elite series garage door openers use Liftmaster's Logic 3.0 technology to provide tough, reliable residential and commercial garage door openers.

Programming a remote control to your Chamberlain Liftmaster Elite series garage door opener is simple.

Tip

Repeat the process to program additional remotes to your Chamberlain garage door opener.

Warning

If your remote won't operate the automatic garage door after being programmed, replace the battery and repeat the programming process.

  1. Press and release the "Radio" button on the Logic 3.0 board; the adjacent light-emitting diode (LED) indicator will turn on.

  2. Hold down the button on the remote control; if your remote has more than one button, press and hold the largest button. Release the button on the remote when the LED indicator begins flashing rapidly. After releasing the button, the LED indicator should glow solidly.

  3. Press and release the "Radio" button again to complete the remote programming process.

The Drip Cap

  • Manufactured by the Chamberlain Group, the Liftmaster Elite series is a line of popular belt-drive, chain-drive and screw-drive garage door openers.
  • After releasing the button, the LED indicator should glow solidly.

Check out this related video from Homesteady on Youtube.