Things You'll Need:
- Valve stem removal tool Large pry bar Large flat tip screwdriver Hard grease
-
Step 1
Lay the tire down on the ground with the outer rim side facing up and remove the valve stem cap.
-
Step 2
Push the tip of the valve stem removal tool into the valve stem and turn counter-clockwise. The valve stem will twist off and air will leak out through the open valve stem.
-
Step 3
Wedge a large flat tip screwdriver between the rim and the tire to break the seal on the wheel.
-
Step 4
Have an assistant stand on the wheel while you wedge a pry bar between the tire and the wheel's rim. Use the wheel's rim as leverage and pry the tire out of position over the top of the rim. This will be difficult to do. You may need to place some hard grease liberally over surface of the rim of the wheel while prying the tire out of place. Make your way around the outside of the rim until you have removed this side of the tire from the rim.
-
Step 5
Flip the wheel over and wedge the pry bar between the tire and the rim of the wheel and continue to pry the tire off the wheel. Continue to pry the wheel off in the same direction as you were prying in step 4. The tire will come off over the top of the outer rim side (the side of the rim that normally faces out, away from the vehicle, when the wheel is on).











