Things You'll Need:
- Flat head screwdriver Phillips head screwdriver Interior panel pry tool Small hook shaped pick
-
Step 1
Open the door containing the panel you wish to remove and roll the window all the way down.
-
Step 2
Locate and remove the three retaining screws on the bottom of the interior door panel with the Phillips head screwdriver.
-
Step 3
Remove the door handle retaining screw using the Phillips head screwdriver.
-
Step 4
Locate the round plastic cap near the arm rest. Pry it off with the flat head screwdriver to reveal another retaining screw. Use the Phillips head screwdriver to remove the screw.
-
Step 5
Push the door panel inward carefully using the flat end of the flat head screwdriver near the door crank handle. (Proceed to Step 6 for power windows.) While applying inward pressure to the door panel, a small retaining clip holding the crank handle will be revealed as it expands by the inward pressure. Use the small hook-shaped pick to pry off the retaining clip. Remove the window crank and the plastic retaining tab behind it.
-
Step 6
For power windows, pry the window control module off of the arm rest with the interior pry tool and unplug the wire harness connections beneath it. Check for another retaining screw under the window control module.
-
Step 7
Remove the triangular black molding covering the side-view mirror by gently prying it off with the interior panel pry tool. Be careful not to break it.
-
Step 8
Pry the outer edges of the door panel away from the door frame. There are plastic clips positioned in seats underneath and you will hear them popping out of place as you pry the panel away from the door.
-
Step 9
Lift the door panel upward once all the retaining clips have been unseated. Be aware of the manual door lock (if applicable). Manipulate the door panel off of the door handle.
-
Step 10
When reinstalling the door panel, align the manual door lock (if applicable) correctly before applying pressure to the retaining clips and their seats.
