How to Make a Tennis Ball Basket

One of the best ways to improve your tennis stroke is to take a basket of balls and have someone feed balls to you. Repetition is how pros make every stroke a routine part of their movement. Having balls fed to one spot over and over lets you focus on technique. A tennis ball hopper or basket makes this kind of workout simple, and you can make your own with some recycled items and basic hardware.

Things You'll Need

  • 5-gallon paint bucket Drill 8-foot 2-by-4 (2) 4-inch screws (4) 3-inch screws Pencil Table Saw Wood Glue
Show More

Instructions

  1. How to Make a Tennis Ball Basket

    • 1

      Empty and clean the bucket. Pry off the the wire handles.

    • 2

      Cut the 2-by-4 into five sections. The first section is the post and should be 2 feet long. The other sections should be be 7 inches each. These will be used to make two identical crosses, one for the base and one to attach to the bucket.

    • 3

      Trace the width of each 7-inch section on the center mark so that two pieces can interlock. Use the table saw to carve the notches into the 7-inch section so they fit snugly.

    • 4

      Fit two sections to make a cross. Repeat to make a second cross. Remove the pieces and add wood glue where the pieces meet, then rejoin them. Allow them to dry.

    • 5

      Place one cross under the bucket. Measure the center point and four points 1 inch from the end of each cross arm. Drill holes at the point in the bucket and the cross. For the bottom cross, only a center hole is required.

    • 6

      Hold the 2-foot post upright. Determine the center point on the side facing the sky and drill a hole. Once again holding the post upright, drill a hole centered on the bottom.

    • 7

      Screw the base (the one with one center hole) to the post with a 4-inch screw. Then place the base on the ground and assemble the bucket with the cross center lining up between the bucket and the post. Align the holes and drill them in place from the bottom inside of the bucket. The center should have a 4-inch screw with the arms using two 3-inch screws.

    • 8

      Sand any sharp edges.

Tips & Warnings

  • This is a simple bucket that stands at waist level to hold a large quantity of balls to feed to a tennis student. This does not serve as a hopper than can pick up balls.

Related Searches:

Comments

You May Also Like

  • Tennis Themed Gifts

    Tennis Themed Gifts. Give a tennis enthusiast a gift that acknowledges her favorite sport. Tennis-inspired gifts range from sporty to sweet. Consider...

  • How to Make Tennis Ball Launchers

    A tennis ball launcher is a simple apparatus, but fundamentally, it's also a rocket device. This project will provide an opportunity for...

  • How to Make a Tennis Ball Puppet

    If you have a supply of tennis balls that have lost their bounce, put them to good use and create some whimsical...

  • How to Recycle Tennis Balls

    We think of tennis balls as having two primary purposes--the first is in a game of tennis and the second as a...

  • Plans for Making Your Own Pitch-Back Machine

    Whether your sport is baseball, tennis or ping-pong, pitch-back machines let you fine-tune technique while improving hand-eye coordination. Unfortunately, most retail ...

  • How to Make Tennis Ball Puppets

    Here is a great little arts and crafts project for the kids to do in class. My son's 3rd grade class set...

  • DIY Paint Sprayers

    Professional painters use paint sprayers to complete a job in less time and create a better paint finish. Many homeowners don't use...

  • How to Make a Good Tennis Ball Mortar

    A tennis ball mortar uses a tennis ball as a projectile and a tubular shaft as a cannon or mortar barrel. Using...

  • Hitting a Tennis Ball

    When hitting a tennis ball, make sure to look directly at the ball and to drive through the ball without rushing to...

  • What Equipment is Used in Tennis?

    Tennis is a recreational sport that requires minimal equipment. The equipment necessary to play the game can be found at several different...

  • How to Create Your Own Custom Tennis Shoes Online

    Tennis shoes, or sneakers, are a type of athletic shoe originally designed for sports, but often worn in casual contexts as well....

  • How to Use a Hopper Gun

    A hopper gun is a tool used in the later stages of modern day home and building construction. Basically it is a...

  • How to Make Your Own Dragon Ball Z Character

    Over a decade after its creation, Dragon Ball Z is still one of the most popular anime or manga series around. Dragon...

  • How to Make Masquerade Ball Masks

    Masquerade ball masks are small masks that you wear over your eyes and nose. These masks are used for balls and Mardi...

  • Homemade Hoop Fish Nets

    Thread the netting through the center of the tennis racket until there is a drooping net hanging from the frame. This can...

  • How to Clean a Tennis Tutor Ball Machine

    Tennis Tutor ball machines have become one of the nation's most popular portable tennis trainers. Their convenient size, durable batteries and powerful...

  • Tennis Exercises for Kids

    Tennis is an active sport for individuals and teams that is enjoyed by participants throughout life. Beginning tennis as a young person...

  • How to Make a Fall Leaf Ball Basket

    A great way to bring some of the beautiful colors of autumn indoors is to make a lovely side-piece or centerpiece focused...

  • How to Make a Tennis Ball Mortar Launcher

    Playing soldier or participating in a pretend “war game” requires weapons that can simulate the real hardware used in a battle. You...

Related Ads

Featured