How to Erect a Metal Shed

Save

A metal shed is an affordable way to add additional space to your home. Metal shed kits are easy to put up. You can easily erect one in a day's time---and you can usually do most of the work by yourself. The sheds basically consist of metal frame members and panels. The pieces are secured together with screws or nuts and bolts, so the tools needed are minimal.

Things You'll Need

  • Building permit Metal shed floor kit Railroad ties Gravel Concrete Protective gloves Power drill Socket Pliers Screwdriver bit Ladder
  • Contact your local building inspector to get a building permit for your metal shed. If you fail to do this, you could be made to move the structure or tear it down later.

  • Decide on the ideal location for your metal shed. The land will be in a level, well-drained area that's easy to get to. (You don't want to walk a mile to retrieve things you have stored there.)

  • Choose a foundation/flooring for your metal shed. You can simply use a metal floor kit and 2 by 4s and plywood. But, this won't hold a lot of weight. It will also be subject to rotting and deterioration over time.

    You can also build a foundation with railroad ties or pressure-treated wood and have a gravel floor. It's an easy, inexpensive choice. You may have a problem with ground water, though.
    A concrete pad is the best foundation/flooring to erect a metal shed on. It will hold a lot of weight and give the structure a strong foundation. Laying concrete is time-consuming and costly, though.

  • Put on your protective gloves to erect a metal shed. Sort through the shed kit and separate the parts. You'll basically have the frame members, the side panels, roof panels, doors, roof cap and nuts, bolts and screws. All the pieces are numbered for easy identification.

  • Assemble the frame of the metal shed using a power drill, socket and pliers. You'll also need a ladder to reach the high parts. Start at one corner. Following the instructions, you'll find that all the pieces have pre-drilled holes. You must align two holes of two frame members then bolt them together. Install the roof gable frames as well.

  • Attach the metal panels to the frame one-by-one by positioning them into place, side-by-side, then screwing them on.

  • Position the roof panels into place and screw them on. The roof cap is a long plastic or metal piece that runs from the front to the back. It covers the middle seam. To erect a metal shed, the roof cap goes on last. You and a helper will position it into place and screw it down.

  • Slide the metal shed doors into the tracks on the front of the structure. You may have to screw the plastic handles onto the doors as well.

Tips & Warnings

  • To achieve the best results, read and follow the manufacturer's step-by-step instructions that come with the metal shed kit. Be careful when handling and working with the parts of a metal shed as the edges can be sharp.

Related Searches

References

Promoted By Zergnet

Comments

You May Also Like

  • How to Construct Steel Buildings

    There are many reasons why the modern homeowner might become interested in steel buildings. Construction of these buildings is easier and faster...

  • How to Put Up a General Steel Building

    General Steel Corp. offers a variety of steel structures pre-engineered to the buyer's specifications. Standardized structural components and hardware make most erection...

  • How to Install an Arrow Metal Shed

    Arrow is one of the country’s leading brands of metal storage sheds. Most Arrow sheds are designed for simple do-it-yourself installation requiring...

  • How to Assemble Metal Sheds

    A metal is a cheap and easy way to provide for all your outside storage needs. Often sold in pre-fabricated kits, a...

  • How to Build a Floor for a Metal Storage Shed

    Metal storage sheds are inexpensive options for quality, outdoor storage. Most units are sold in pieces for assembly on site without flooring...

  • How to Put Up a 10X12 Metal Shed

    Putting up metal sheds is rather like building objects with an erector set -- you fasten pieces together to make the structure....

Related Searches

Check It Out

22 DIY Ways to Update Your Home on a Small Budget

M
Is DIY in your DNA? Become part of our maker community.
Submit Your Work!