How to Remove a Tire Valve Core

Save

Before you can remove a tire from its rim, you have to let the air out of the tire. This can take several minutes if you do it by pressing on the valve stem, but it takes only a few seconds if you remove the valve stem entirely.

Things You'll Need

  • You will need a valve stem removal tool. There is a wide variety of such tools available, and most are not expensive. Some are valve caps with a notched tube on the top; slotted metal valve caps come in packages of four and only cost a few dollars. Such valve caps are particularly useful for bicyclists, as it provides an easy way to carry the tool.

Removing the valve stem

  • First, remove the valve cap. As the cap is small and easily lost, put it in your pocket or some other safe place.

  • Using your valve stem removal tool or a slotted metal valve cap, turn the valve stem counterclockwise several turns until it comes out of the valve. You will feel and hear a rush of air if the tire is pressurized. As with your valve cap, put the valve stem in a safe place, as it is small and easy to lose.

  • After the tire is depressurized, replace the valve stem by starting it in a clockwise direction with your fingers then finishing with the valve stem removal tool or slotted metal valve cap. You will need it when you re-pressurize the tire and a small part like that is easily lost if not replaced immediately.

Tips & Warnings

  • Removing the valve cap causes a blast of air that can easily blow dirt or contaminants into your eyes. Always wear eye protection and keep your face clear of the immediate vicinity of the valve.

Related Searches

Promoted By Zergnet

Comments

Related Searches

Check It Out

10 Delicious Game Day Eats That Rival the Game

M
Is DIY in your DNA? Become part of our maker community.
Submit Your Work!