How to Install Aries Nerf Bars

Aries Nerf bars are a great addition for any truck or sport utility vehicle. Not only do they provide for great looks, they can be very useful in getting in and out of the vehicle. Installing these useful vehicle features is easy and requires just basic tools.

Things You'll Need

• Aires Nerf bars kit Standard socket wrench set

Instructions

1. Put your vehicle in an open, accessible location. Then pull it onto blocks or jack it up to allow easier access to the underside of the vehicle.

2. Remove one of the Nerf bar sides from the kit. Match it up with the side of the vehicle it complies with. (The rubber sections of the Nerf bar will match up under the doors of the vehicle.)

3. Slide under the vehicle and match the Nerf bar up to the pre-drilled accessory holes on the vehicle's frame.

4. Hold the Nerf bars up against the mounting holes and use a socket wrench to place the mounting bolts in their corresponding sockets. Crank them down as tightly as possible.

5. Remove the other Nerf bar from the kit and repeat the process on the other side of the vehicle. Make sure to get the mounting bolts as tight as possible.

Tips & Warnings

• It may be helpful to have another person help you hold the Nerf bars up as you mount them to the frame.

• Always stay aware of pinch points when working with movable vehicle parts.