How to Install a Shower Faucet

Save

Shower faucets are available in a variety of designs that include single-handle, dual-handle and three-handle. Shower faucets are notorious for developing leaks, which often can be traced to the valves controlled by the faucet handle(s). Leaks occur when the washers within the valve no longer provide a good seal. Whether the shower faucet is a single, dual or three-handle design, the installation process is the same.

Things You'll Need

  • Flathead screwdriver or dull knife Plastic putty knife Adjustable wrench Deep-set socket Ratchet wrench Silicon caulking Caulking gun
  • Locate the structure's main water supply shut-off valve at the water meter, then twist the valve in a clockwise direction to turn the water off.

  • Remove the faucet's handle cover from the center of the handle to reveal the retaining screw. The cover can be removed by prying it away from the handle with a flathead screwdriver or the blade of a dull knife, such as a butter knife.

  • Remove the handle's screw with a screwdriver, then pull the handle away from the wall.

  • Remove the escutcheon plate from the bathroom's wall by either removing the plate's screw(s) with a screwdriver or cutting through the caulking that surrounds the lip of the plate with a plastic putty knife.

  • Grasp the bonnet nut that surrounds the faucet's stem assembly with an adjustable wrench, then turn the nut in a counterclockwise direction to remove it.

  • Unscrew the faucet's stem assembly with a deep-set socket and a ratchet wrench, then pull the assembly out of the wall. Insert the replacement assembly into the wall and tighten it with the ratchet wrench. Slide the bonnet nut over the faucet's stem and tighten it with the adjustable wrench.

  • Place the escutcheon plate against the wall and install the plate's screw(s) with a screwdriver. If the plate is held to the wall with caulk, apply a bead of silicone caulking around the seam between the plate and the wall with a caulking gun. Slide the faucet's handle onto the faucet's stem, then insert the handle's retaining screw through the center of the handle and tighten the screw with a screwdriver. Press the handle's cover onto the center of the handle, then turn the water supply on to complete the installation.

Related Searches

Promoted By Zergnet

Comments

You May Also Like

  • How to Install Bathroom Faucets

    Installing a new bathroom faucet requires little more than a wrench and some elbow grease. Follow these instructions to help give your...

Related Searches

Check It Out

22 DIY Ways to Update Your Home on a Small Budget

M
Is DIY in your DNA? Become part of our maker community.
Submit Your Work!