-
Step 1
Start by lowering the spare wheel of the truck.
-
Step 2
Next, loosen the bed bolts.
-
Step 3
There are two rails you need to slide under the bed of the truck. Place one on the left and one on the right.
-
Step 4
Now insert the mounting bolts to level out the rails. Now retighten the bed bolts.
-
Step 5
Mark the frame you are going to drill holes.
-
Step 6
Before drilling holes, remove any wiring that may be on the other side of the frame. Now drill your holes.
-
Step 7
Now place the bolts through the holes you have just made. Secure it with nuts on the other side.
-
Step 8
Now mark the bed of the truck so you know where to drill the holes. Drill the holes. Use a hole saw. Make sure you drill the holes to connect to the rails.
-
Step 9
If the holes on the bed don’t line up with the rails, loosen the rails and line it up with the holes on the bed.
-
Step 10
Insert the pucks into the hole and tighten them with an Allen wrench.
-
Step 11
Assemble the legs and head of the fifth wheel and install the fifth wheel on the pucks and tighten it down.
-
Step 12
Now let’s install the fifth wheel wiring adapter. Remove the old adapter from the truck.
-
Step 13
Install the new wiring onto the wiring connector and mount up the wiring box. Drill a hole on the side of the bed of the truck. Run the wiring through that hole. Install a wiring connector and you are done.
