How to Clean a Two-Speed Floor Polisher Machine
Keeping a clean work site starts before the cleaning crew enters the building. By keeping the floor polisher clean, worn parts will present themselves before they break down, causing lost time on a job. Elegant Cleaning Services, of Nutley, N.J., offers steps to keep a two-speed floor polisher clean and tidy.
Things You'll Need
- Rags
- Bucket
- All-purpose cleaner/degreaser
- Floor stripper
- Stiff brush
- Steel wool (fine)
- Gloves
Instructions
-
Cleaning A Floor Polisher
-
1
Mix some all-purpose cleaner as per the manufacturer's specifications. After dipping a rag into the mixture, tightly wring it out.
-
2
Wipe down the handles, pipe and base of the machine. Dry and buff with additional rags.
-
-
3
Mix some floor stripper as per the manufacturer's specifications. Dip a rag into the mixture and tightly wring it out.
-
4
Wrap the unplugged electrical wire with the rag dipped in the floor stripper. Pull the wire through to remove any sticky floor finish that is building up on the wire.
-
5
Wipe down the bottom portion of the machine and the bumper with the floor stripper rag; this section also builds up a sticky residue from floor finish.
- 6
-
7
Use the steel wool to scrub any stubborn spots, such as rust, on the metal housing.
-
1
Tips & Warnings
Wipe down the machine after each job to keep it looking its best.
Wear gloves and goggles when working with cleaning chemicals.
References
- Photo Credit Photos by Tom Ferraioli