Things You'll Need:
-
Step 1
You will want to peel off the bulk of the sticker. Do this by slowly peeling the bumper sticker off starting at one of the corners. Go very slowly trying not to tear the sticker.
-
Step 2
After you remove the sticker there will still be adhesive left. Take a blow dryer and using low heat warm the adhesive. Keep the blow dryer at least 3 inches away so that you do not damage the cars paint.
-
Step 3
When the adhesive is warmer use your fingers and rub back and fourth over the adhesive. It will begin to come up in little rubbery balls.
-
Step 4
If there is still adhesive left then try using a adhesive removing solvent.
-
Step 5
Take a polishing compound and buff the area when you are finished.







