-
Step 1
Before we get started with the rigging steps, let's talk a little about the "Float and Fly" rig. It is actually a small jig tied to a leader that is fished under a bobber. This technique is used for suspended bass, mainly in the coldest part of winter. This is a bait that fish will feed on by sight, so water clarity is very important. This is the reason this method of fishing is used mainly on deeper clear water lakes.
-
Step 2
The first step is to assemble the right equipment. What do you need? For starters you will need a fairly limber spinning rod in the 8' to 10' range with a decent spinning reel. Spool your reel with 6 to 8lb test monofilament line or 10 to 20lb test Fireline(Fireline has a smaller diameter). You will need a small bobber, a 3-way swivel, an assortment of light 1/16 oz hair jigs, and extra line in the 4 to 6lb test range.
-
Step 3
Now that you have your tackle, lets rig it! Start by tying a length of 4lb test line to your 3-way swivel. The length of the line depends on how deep you want to fish(sometimes up to 12 to 14 feet is not uncommon). So, measure accordingly and tie your small jig on.
-
Step 4
After you have the swivel and jig tied on, lets attach the swivel, leader, and jig combo to our main line by tying to another leg of the 3-way swivel.(I like a Palomar knot so I tie everything in this order.)
-
Step 5
Now that you have the leader and jig connected to the main line, it is time to add the bobber. The bobber should have a clip on the bottom that will attach to the 3rd leg of the swivel. If you have followed the directions you should be ready to try the "Float and Fly" technique. It will take some experimenting and lots of time looking at your electronics to be able pinpoint the best depth to fish.
Comments
goodselfme said
on 8/18/2009 Great detail here to rig the float and fly for bass.TX 5*