Things You'll Need:
- 10 to 15 glow sticks
- Black electrical tape
- Thin, sleeveless undershirt
- Duct tape
- Lamp
-
Step 1
Bend the glow sticks to activate the glowing gel inside them. Form the first glow stick into a circle, attaching the ends with the hollow plastic clasp.
-
Step 2
Line up the second glow stick with the first so that the ends align on top. Grasp the two glow sticks in the center of the bottom. Grab the right end of the second glow stick and wrap it over, then under the first. Wrap the left end of the second glow stick under, then over the first, so that the second glow stick is wrapped around the first glow stick. Attach the tails of the second glow stick together with the hollow plastic clasp.
-
Step 3
Repeat Step 2, wrapping the glow sticks around the coiled loop, until the circle is a couple inches thick or all the glow sticks have been used up.
-
Step 4
Create the Iron Man ARC reactor pattern on the glow-stick loop using black electrical tape. First, use the tape to line the inside of the circle. Then, divide the circle into 10 sections by wrapping tape around the loop at even intervals. Finally, line the outside of the circle with a piece of tape.
-
Step 5
Turn the undershirt inside-out and center the ARC reactor about two inches below the neckline. Use duct tape to attach the ARC reactor to the shirt.
-
Step 6
Turn on a lamp and hold the ARC reactor about two inches away from the bulb for about a minute to charge up the glow sticks. Turn the shirt right-side out and put it on.
