How to replace the in-cabin microfilter on a Infiniti G35

So you don’t know how to replace the in-cabin microfilter on your G35. Well don’t worry, just follow the instructions below.

Difficulty: Moderate

Instructions

1. Remove the trim panel. Just pull up on it and remove it. There’s a screw under the dashboard. Unscrew it.

2. There’s a panel underneath the dashboard on the passenger side. Pull down on it and remove it. Push the side panel outward and remove it. Open up the glove box and there are four screws above it that you need to remove.

3. After removing the screws, remove the two screws that are under the dashboard. Pull the glove box outward from the bottom then from the top. Remove the glove box. Disconnect the electrical connector in the back.

4. All the way in the back is a white cover you need to remove. Press in the tab and pull the cover forward. Then slide the cover to the right. Remove the cover.

5. You should find the old air filter. Pull it out. Insert the new filter in its position.

6. Reinstall the white cover. Press the filter in place. Reconnect the electrical connector to the glove box.

7. Position the glove box into place and press it in until you hear the tab click. Reinstall all four screws. Screw in the two screws that you removed from under the dash. Reinstall the side panel. Reinstall the nut in the back panel. Reinstall the trim panel and you are done.