How to Program the Keyless Entry on a Pontiac G6
Introduced in 2005, the Pontiac G6 became one of Pontiac's top-selling cars. The car often comes standard with a keyless-entry remote program, and the program allows remote access to the doors, trunk, panic button and car starter. Instead of having to pay a fee to mechanics or dealerships, you can program the keyless entry quickly with only your car and a remote.
Other People Are Reading
Instructions
-
-
1
Get in your Pontiac G6 and make sure all the doors and the trunk are closed.
-
2
Put your key in the ignition and hold the "Lock" button on the driver's car door.
-
-
3
Turn the G6 key in your ignition from "On" to "Off" while holding the "Lock" button, and do two more cycles of "On" and "Off" in quick succession.
-
4
Release the "Lock" switch on your door and press and hold the "Lock" button on your keyless remote for 10 to 15 seconds.
-
5
Remove the key from the ignition of your G6, and test the programming.
-
1
- Photo Credit keyless remote image by Ray Kasprzak from Fotolia.com
More Like This
Comments
View all 7 Comments-
I tried it on my 2005 g6 and it doesn't work.
-
u need to learn how to read, they are very specific
-
u need to learn how to read, they are very specific
-
these are the most vague instructions. eHow, you need to use specific language!
-
rzea
Jan 10, 2011
This doesn't work. - When you say "hold the "Lock" button on the driver's car door." do mean hold it down so the doors get locked, or hold it up so the doors remain open? - When you say "Put your key in the ignition" do I turn it on or leave it off? I tried both and none worked. Any clarification would be great.
