×

How to Make a Kitchen Slab With a Cabinet Door

Karie Lapham Fay

Whether your old cabinetry needs a face lift or you have one cabinet door that is damaged, making a slab cabinet door is one of the simplest jobs in the business. A slab is nothing more than a solid sheet of wood -- or wood product -- cut to size and fitted with a knob or handle. While plywood or solid wood boards may be used to create slab cabinet doors, wood is subject to splitting, warping and twisting. Other options include medium density fiber board and thermafoil. Neither is subject to the swelling and movement and both are cut similarly. MDF does need special surface treatment, however.

Slab cabinet doors present a minimalist or modern look.

Step 1

Measure the original cabinet door or a surrounding door if you are replacing a damaged door. To fit a new cabinet, measure the cabinet opening, if the cabinet is frameless, or the cabinet face itself if there is a frame -- wood trim that surrounds the opening. Increase the height and width measurements according to the door type: partial or full overlay.

Add 1 inch to both the height and width for a 1/2 inch partial overlay on a single door; if the door is one of a pair over a single opening, add 1 inch to the height as previously calculated. Next, add 1 inch to the width then divide the result in two. Subtract 1/16 inch from the result to obtain a 1/8-inch gap between the doors. Increase the width and height additions for a full overlay door, allowing only 1/8- to 1/4-inch gap surrounding the door on every side.

Step 2

Mark a sheet of 3/4-inch plywood or MDF to create a cut guide. Measure from the edge over to the width required in three spots several inches apart. Connect the marks with a straightedge. Repeat the process for the cabinet door height.

Step 3

Cut out the cabinet door. Use a table saw or clamp a straightedge, aligned with the cut guide, to the material to guide a circular saw. Sand the edges smooth when complete. Precision cuts and finishing lend a professional look to your cabinetry.

Step 4

Finish the edges of plywood, MDF or any material other than solid wood. Cut strips of veneer edge banding -- a real wood product -- an inch longer than the height of the doors using a utility knife. Spread veneer glue, according to product instructions, along the door edge. Alternatively, use self-adhering veneer that activates with heat.

Step 5

Press the banding in place, precisely aligned, starting at the center and working outward. Push and spread the glue and aid adhesion by rubbing the veneer with a small block of wood. Alternatively, heat the strip with a hairdryer as you spread the veneer. Repeat for each door edge.

Step 6

Trim the overhanging veneer edges, folding to break it free or cutting with a utility knife. Sand across each edge band lightly with fine-grit sandpaper to finish.

Step 7

Apply the desired finish to the door surface, both interior and exterior. Choose the finish depending on the material. Wood is beautiful when stained, for instance, but MDF and plywood generally require application of a veneer sheet material, bonded the same as the edges. MDF may also be painted for a modern look.

Step 8

Install hinges, following the manufacturer's instructions, along one door side. Use the hinge appropriate for an overlay door according to your cabinet type -- frameless or framed. Hang the door to complete.