How to Install Angel Eyes
Angel eyes are circular lighting bars that surround the headlamps of your car. They not only look aesthetically pleasing but draw more attention to your customized car. Many shops will install angel eye kits, but it is sometimes just as easy to install them yourself.
Other People Are Reading
Instructions
-
-
1
Pop the hood of your car and use a screwdriver to take off the mounting bolts in the back of the headlight assembly. This will allow you to remove the headlight assembly and unhook the wiring harness from the back of the headlamp.
-
2
Unscrew the mounting bolts surrounding the headlight to remove the headlight lens. Use the adhesive strips supplied in the angel eyes kit to attach the light bar around the headlamp. Run the wires from the angel eye through the wiring hole in the back of the headlight.
-
-
3
Cut a small portion of the power wire (the red one) on the wiring harness and twist the red wire from the angel eye into the exposed wire. Wrap the exposed wires tightly with electrical tape, then bolt the end of the black wire (ground) from the angel eye onto the available metal portion of the headlight assembly mount with a sheet metal screw from the light kit.
-
4
Put the mounting screws back into the lens, then mount the headlight assembly in place with the mounting screws. Reattach the wiring harness to the headlamp, then repeat the process for the other side.
-
1
Tips & Warnings
It is advisable to try turning on the headlights and angel eyes before remounting the headlight assembly to make sure there are no problems.
