How to Build a Covered Wagon Model for Kids

Covered wagons carried mostly provisions and sheltered pioneer families while they built houses.
••• Hemera Technologies/PhotoObjects.net/Getty Images

Pioneer history usually comes up in the intermediate grades inspiring children to wonder how to build a covered wagon model as a school project. Conestoga wagons and prairie schooners, built specifically for overland travel, are an icon of most people's conception of the westward movement in 19th century United States. Rather than laying out the cash for an expensive wagon model kit, make a covered wagon model out of recycled materials and some basic crafting supplies.

    Slice straight along the bottom edge of the spout on a half-gallon paper juice or milk carton and cut straight down both sides and along the bottom to form two halves. One half carton is the wagon box so you can recycle the other half or use it for another craft. Cover the wagon box with masking tape to resemble boards or wrap it in brown paper bag.

    Cut two cardboard rectangles about one inch wide and tall enough to stick out above the carton edge about two inches. Glue them in the corners at the spout end. Cut two or three more rectangles the width of the carton glue them to the side supports to form a wagon seat and back.

    Cut six pieces of wide straw the height of the wagon box. Glue two in the back corner and two just behind the seat (one on each side). Place the third pair opposite one another at the midpoint on the inside edge of the sideboards. Bend 12-inch lengths of flexible coat hanger wire into arches and insert the ends into the straw supports over the wagon.

    Cover the arch supports with a sheet of brown paper bag or white cotton cloth. Tie the cover to the wires or glue to the sideboards of the wagon bed.

    Trace a plastic container lid four times on thick cardboard. Draw a wagon wheel pattern on one side. You may choose whether to use the cardboard wheels alone or glue them to four plastic lids for a sturdier wheel.

    Tape a length of wide straw the width of the wagon bed to the front and back on the underside. Run a thin straw or wire axle through each straw support so it sticks out a little on each side. Hot glue the wheels to the axles.

    Things You'll Need

    • 1/2 gallon juice or milk paper carton
    • Thin or thick corrugated cardboard
    • Masking tape
    • Brown paper bag or white cotton fabric
    • String, twine or yarn
    • 4 plastic container lids
    • 3 wide straws
    • 4 small straws
    • 4 feet coat hanger wire
    • Scissors
    • White glue
    • Hot glue
    • 13 craft sticks
    • 12 to 16 skill sticks
    • Pipe cleaners
    • Flexible rubber tubing
    • Thin balsa strips
    • Bendable straws

    Tips

    • Another option is to build the wagon box out of craft sticks and skill sticks.

      If you don't have wire available, you can make arch supports out of pipe cleaners, flexible rubber tubing, thin balsa strips or bendable straws.

Related Articles

How to Build a Miniature San Fernando Rey Mission
DIY Lobster Traps
How to Make a Simple Machine for a Science Project
How to Build an Elbow Joint Model
How to Build a Mini Electric Car for a Science Project
How to Make a Bridge Out of Straws
How to Make Your Own Model of a Water Turbine
How to Make a Southern Plantation Project
How to Make a Canoe for a School Project
How to Make Steamboat Science Projects
How to Build a Newton Car
How to Build a Longhouse for a Third Grade School Project
How to Make a Model Wind Pump Science Project
How to Use Copper to Make Your Own EMF Protector
How to Build a Spinning Jenny Paper Model
How to Make a Cardboard Guitar for a School Project
How to Make a 3D Model of the Muscular System for a...
How to Make Electricity Flow Like Lightning Between...
How to Make a Model Boat That Floats
Self-Powered Car Science Projects