Things You'll Need:
- InkJet Refill Kit (S020187/S020191)
- News Paper
- Tape
- Gloves
- Apron (optional)
-
Step 1
black ink tank points to the lower portion(FILL HOLE) & upper portion (VENT)As a preventive ink stain measure gather up some old newspapers & use them to line the surface of your work space, a couple of sheets thick should do the trick.
-
Step 2
example ofRemove ink cartridge from Printer according to the manufactures directions, then proceed by placing a piece of Scotch tape over the "OUT LET" which is the larger hole located on the bottom of each cartridge.
-
Step 3
one example of a refill kitRefer to refill kits specific instructions for use of there product. Next peel the label off cartridge enough to expose the first hole on the "LOWER" portion. If you peel it past the lower fill hole IT'S OK just place the label over upper(VENT)portion & apply tape to hold it down until the refill process is complete
-
Step 4
With the pipette tube or injection tool inserted into fill hole add pressure pushing down inside the cartridge until you think your done, then push a little more, slowly release or draw back out administering the ink into corresponding tank. DO NOT OVER FILL!!!
-
Step 5
pipette filled exampleNext remove the syringe or funnel and place a piece of tape to seal the fill hole once again. Then before replacing the cartridge back into the printer be sure to remove the tape from the bottom hole.
-
Step 6
Let the full cartridge(s) stand unused in the printer for 24hrs if possible, this will allow ink to flow properly. Running 1-3 Cleaning cycles is recommend to help the print heads from clogging.
