How to Install a New Toilet Seat Easy
Even though toilets are durable, over time, the seat may need replacing because of a crack, wear or tear or perhaps you're moving into an apartment and just want a new seat for sanitation purposes. It's a very simple process that will take just a few minutes of your time. Does this Spark an idea?
Other People Are Reading
Instructions
-
-
1
Remove the plastic caps that are covering the bolts that hold the toilet seat down. Turn the bolts counterclockwise with a screwdriver. Remove the bolts and nuts. If the nuts and bolts are metal, they may be a little difficult to remove. If so, spray a water displacement lubricant on the bolts. Then remove the bolts and nuts.
-
2
Lift off the old toilet seat and discard.
-
-
3
Place the new toilet seat on top and position it so the mounts are directly over the holes.
-
4
Put a bolt through the mount and the nut on the bottom of the bolt.
-
5
Hold the nut in place with the wrench and turn the bolt clockwise with the screwdriver. Tighten the nut with the wrench. Repeat for the other side. If there are any covers, snap them in place. Shake toilet seat lightly to make sure it is on tight.
-
1
References
- Photo Credit Jupiterimages/Photos.com/Getty Images
