How to Measure for a Sunsetter Awning

Measuring for your Sunsetter awning can be achieved in a short period of time with a measuring tape. Once you have measured your deck or patio, compare your measurements to see what size Sunsetter awning will fit your house.

Difficulty: Moderately Easy

Instructions

Measuring for Motorized or VISTA Models

1. Measure the wall height were the awning is to be installed. The requirement is 7 feet 6 inches from the floor of the patio or deck to the bottom of any overhang, roof or eve on the house.

2. Measure the width of the wall for your awning. Awnings come in measurements from 10 to 18 feet, in 1-foot increments. One exception is that the 10-foot awning measures 123 inches, whereas the others measure their exact size--that is, a 12-foot awning measures 12 feet. Also measure between the railings on your deck or patio to make sure the awning support arms will fit inside the railings.

3. Measure at least 8 inches on each side of the house where the awning will attach. This 8 inches should contain no obstructions so the awning can fit snugly against the house.

Measuring for Model 1000XT or 900XT

4. Measure the wall height were the awning is to be installed. The requirement is 7 feet 6 inches from the floor of the patio or deck to the bottom of any overhang, roof or eve on the house for the Model 1000XT to fit and at least 6 feet 8 inches for the 900XT. These awnings can be installed up to 10 feet off the patio or deck floor.

5. Measure the width of the wall for your awning. Awnings come in measurements from 7 to 20 feet, in 1-foot increments. Also measure between the railings on your deck or patio to make sure the awning support arms will fit inside the railings.

6. Measure at least 8 inches on each side of the house where the awning will attach. This 8 inches should contain no obstructions so the awning can fit snugly against the house.

Resources

• Sunsetter Awnings