How to Remove a SmartWater Filter

Your SmartWater filter should be located behind your GE SmartWater refrigerator, most likely hanging from a small bracket or manifold mounted on the wall. Removing the SmartWater filter doesn't require any tools at all and takes just a few moments. Before you begin, make sure you know where the shut-off knob is for the water supply to your GE SmartWater refrigerator.

Difficulty:

Easy

Instructions

1. Locate the source of the water supply to your refrigerator and twist the knob all the way to the left, shutting down the flow.

2. Dispense water from your refrigerator until nothing comes out; this clears the tubing and filter as much as possible.

3. Drag the refrigerator forward until you can locate the SmartWater filter. It should be either mounted on a wall bracket or attached to the back of the refrigerator.

4. Remove the filter by unscrewing it from its housing. Be ready to catch any dripping water with a clean rag or towel.

5. Replace the filter with a new one if you so desire: Just screw it into place.

6. Return the refrigerator to its original location and turn the water supply back on.