Things You'll Need:
- Three pieces of pre-quilted fabric, six by eight inches
- Three pieces of cotton fabric for lining, six by eight inches
- Sewing machine
- One piece each of pre-quilted fabric and liner, two and one half by 22 inches
- One yard of one inch nylon strap
- Pins
-
Step 1
Sew the pre-quilted strip of fabric to three sides of one of the pre-quilted rectangles with right sides together. Leave one six inch side exposed. Sew one of the other pre-quilted rectangles to the strip on the other side with right sides together.
-
Step 2
Repeat for the lining, however leave a three inch gap, back-stitching to secure, at the bottom of one of the rectangles. This will give a hole to pull the bag right side out through.
-
Step 3
Pair the final pre-quilted rectangle with the final liner rectangle with right sides together. Sew around all sides but leave a three inch opening along one of the six inch edges.
-
Step 4
Turn the final rectangle right side out through the hole. Smooth out the seams as much as possible, ironing if necessary. Stitch the opening shut. This creates a flap to close the camera bag.
-
Step 5
With the pre-quilted fabric bag turned right sides in, pin the completed flap to the edge of the bag with the flap hanging inside the bag. Pin the nylon strap on each side with the strap inside the bag as well.
-
Step 6
Set the lining bag inside the quilted bag with its right sides facing out. Pin along all the edges. Sew the bag together around the edges. Take back-stitches over the straps to secure.
-
Step 7
Turn the entire bag right side out through the hole in the lining. Stitch the hole closed. Stitch around the edges once more to secure the bag and ensure the flap faces the correct way naturally.











