How to Replace Desktop SDRAM Memory
One of the best, and most essential upgrades for older desktop computers, is the replacement of old SDRAM memory with newer, higher capacity SDRAM. This process, while requiring work inside the computer, is quite simple, and is not very risky, even for those with little computer experience. Furthermore, SDRAM memory comes quite cheap, and can be easily found on the internet, computer stores and many stores like Wal-Mart and K-Mart.
Other People Are Reading
Things You'll Need
- Standard tool kit
- Replacement memory modules (if placing more than one, they must be the same brand and size)
Instructions
-
-
1
Determine the exact specifications of the kind of memory your computer uses either by visiting the support page for your computer make and model or by using the Memory Advisor Tool at crucial.com.
-
2
Choose an amount of memory that will meet your needs. To run common software these days, the recommended amount is at least 2 gigabytes (two 1-gigabyte memory "sticks").
-
-
3
Remove the power plug from the back of the computer, and lie the computer case on a flat, clean surface on its side.
-
4
Unscrew the mounting bolts on the back of the case, and slide the side of the case away from the computer.
-
5
Locate the memory ports on the computer's motherboard. These will be near the processor and graphics card, and will contain memory modules that look much like the replacement module/s that you purchased.
-
6
Press down the clips on both sides of any memory modules currently located within the computer, and remove them by gently pulling them up and out of the computer.
-
7
Place the new memory modules in the memory slots by simply pressing them in. The clips at both sides of the module slots will click back into place when the cards are pressed far enough down.
-
8
Replace the side of the computer case, and secure it with its mounting bolts.
-
9
Stand the computer back up, and plug the power cord back into the case. Then, start the computer. It will automatically detect the new memory module/s that you have installed.
-
1
Tips & Warnings
For intensive gaming applications, install a tleast three to four gigabytes of SDRAM.
Be very careful when removing and replacing memory modules. The slightest mistake can permanently ruin a motherboard.
Resources
- Photo Credit www.upgradecomputermemory.com
