How to Remove a Type R Gear Knob

A custom gear knob is one of the most common aftermarket upgrades found in the interior of a manual transmission car. Whether you are replacing the Type R with a different custom knob or you need to remove it for another reason, unlike some gear knobs the Type R has a feature that requires an extra step to remove it.

Things You'll Need

• Adjustable wrench
• Cloth

Instructions

1. Pull down any plastic casing that blocks the bottom of your gear knob. In most vehicles using a Type R gear knob, the casing should not need to be adjusted much--if at all--to remove the knob.

2. Locate the locknut on the bottom of your gear knob. This is a 13 mm nut. You will need to use a vice or adjustable wrench to loosen the nut. Turn the nut one turn.

3. Unscrew the gear knob. With the locking nut loosened, the knob should unscrew easily.

4. Take the locknut off after you have removed the gear knob. Be careful when turning the locknut not to scratch it.

Tips & Warnings

• Place a cloth between the wrench and locknut to avoid damaging the nut.

• Be careful if you have to adjust the plastic casing, because it is fragile and can be damaged easily.