How to Disassemble an HP Pavilion Dv2130us

HP Logo

Disassembling an HP Pavilion Dv2130us laptop requires caution and patience. Each component must be removed carefully to prevent damage. Computers should only be disassembled in order to upgrade or replace hardware, troubleshoot faulty hardware, or repair loose cables and jumpers. The HP Pavilion Dv2130us laptop manual can greatly aid you in disassembling your laptop by providing images and diagrams of component location. Everyone can disassemble their HP laptop as long as they pay close attention to detail and handle the laptop gently.

Things You'll Need

• Computer or Electronics toolkit

Instructions

1. Turn off your laptop, close the lid, and disconnect from the power supply.

2. Turn your laptop over so the bottom is facing up and battery is facing you.

3. Remove the battery. The battery is closest to you. Slide the latch, directly below the battery, to release the battery. Gently pull the battery up and out.

4. Remove the Mini-Card compartment. The compartment is located beside the battery latch. Remove the screw holding the compartment in place and carefully remove the lid.

5. Remove the memory modules. The memory compartment is located beside the Mini-Card compartment. Remove the two screws holding the lid in place. Remove the lid and press the clips holding the memory in place. When the memory module tilts upward, gently remove it.

6. Remove the hard drive. The hard drive is located below the memory compartment. Remove the two screws holding the drive lid in place. Carefully remove the hard drive kit from the laptop.

7. Remove all remaining screws and use a flat head screwdriver to gently pry the base up. Unscrew the keyboard assembly and carefully lift the keyboard to remove it.

Tips & Warnings

• Lay all parts separately along with their screws to make reassembly easier.

• Take measures, such as anti-static wrist straps or mats, to prevent static discharge.

Resources

• Download HP Manuals