How to Fasten an A.D. Ring Belt
Wearing a belt as an accessory can turn a simple outfit into a stylish fashion statement. There are many different fashion belts available, including the ring belt, which create the appearance of a smaller waist while adding a hint of renaissance flair. However, fastening an A.D. ring belt requires a bit of fashion know-how. Does this Spark an idea?
Instructions
-
-
1
Wrap belt around your waist. The ring side of the belt should be on your right and the non-ring side of the belt should be on your left.
-
2
Hold the ring with your left hand. With your right hand, pull the non-ring side through the ring.
-
-
3
Twist the non-ring end once so that the wrong side of the belt (the side that will not be visible when the belt is worn) is facing forward. Place the non-ring end underneath the belt about two inches to the right of the ring and pull it through. The right side(the side that will be visible when your belt is worn) of the non-ring end of the belt belt should be against your waist. This should create a U-shape.
-
4
Loop the non-ring side of the belt over the ring side. With the side that you want to be visible now facing outward and the end facing down, put it through the U-shaped loop.
-
5
Pull the belt tight with your right hand. Your A.D. Ring Belt can now be adjusted to fit your waist.
-
1
