How to Install a Toilet Over Tile

Save

Your new bathroom floor tile is installed, grouted and sealed. You're ready to put the room back together, but you've encountered a problem: How do you install a toilet over a tile floor? New tile raises the floor about half an inch, and you need to modify your toilet installation to make up the distance. With a few items from your local hardware store and a couple of household tools, you'll have that toilet flushing in no time.

Things You'll Need

  • Wax toilet ring extension kit
  • Disposable latex gloves
  • Pipe-thread tape
  • Adjustable wrench
  • Measure the length of the flange bolts that are on either side of the floor drain and the depth of the toilet bolt holes. If you need more length, exchange the flange bolts with longer ones from the extension kit.

  • Tip the toilet on its side and, with gloves on your hands, gently insert the wax ring into the bottom drain hole of the toilet. Take care not to move the wax out of form, and don't get it on your skin or clothing.

  • Raise the toilet enough to get your arms around the sides and lift it, being careful not to bump the wax on the floor or walls.

  • Insert the toilet onto the floor drain hole, aligning the bolts on the floor flange with the slots on the sides of the toilet. Lower it straight down so that the wax seal doesn't hit the edge of the drain and bend out of form.

  • Close the lid and sit on the toilet to seat the wax ring firmly into the drain opening, being careful not to wobble from side to side.

  • Tighten the nuts onto the flange bolts, being careful not to overtighten. This could crack the porcelain and ruin the toilet.

  • Attach the water supply line to the toilet and to the water supply above the shutoff valve. Wrap the threads with pipe-thread tape and use an adjustable wrench to tighten it securely.

Related Searches

  • Photo Credit MorgueFile
Promoted By Zergnet

Comments

You May Also Like

Related Searches

Check It Out

22 DIY Ways to Update Your Home on a Small Budget

M
Is DIY in your DNA? Become part of our maker community.
Submit Your Work!