How to Change a Toyota Supra Fuel Pump

Save

Fuel pumps, especially in Toyota Supras, tend to go out occasionally. So, rather than spend hundreds of dollars to have a shop replace the pump for your, why not buy the pump yourself and replace it? The process is quite simple and not very time consuming.

Things You'll Need

  • Standard tool kit Replacement fuel pump

Instructions

  • Pull the Supra up on blocks. Make sure to activate the parking brake.

  • Slide under the vehicle and locate the fuel pump. It is found under the driver side section of the car and looks much different than the parts around it.

  • Once you have located the fuel pump, begin removing it by unplugging the electrical conduit from the back of it. To do this, simply lift up on the plug and pull it out.

  • Use an open-end wrench to loosen both sides of the pump. Then, slide the fuel pump away from its connection ends. Fuel will begin to drain out of the input hose. Cover this with your finger until the next step.

  • Insert your replacement fuel pump into the opening. Tighten the input side, then the output side with the same open-end wrench.

  • Plug in the conduit once again.

  • Deactivate the parking brake. Remove the Toyota Supra from its blocks, it's ready to roll..

Tips & Warnings

  • Rebuilt fuel pumps can be found at many auto parts stores and are much less expensive than a new one pump
  • Always be aware of pinch points, and the vehicle falling when working under the vehicle.

Related Searches

  • Photo Credit www.ning.com
Promoted By Zergnet

Comments

You May Also Like

Related Searches

Check It Out

How To Travel For Free With Reward Points

M
Is DIY in your DNA? Become part of our maker community.
Submit Your Work!