How to Test for the Hardness of Water
The most common water problem is hardness, which is caused by calcium. No natural water supply is free of hardness. Hardness is measured in grains per gallon, parts per million or milligrams per liter. If you are testing swimming pool water, most swimming pool stores will test your water for free if you bring in a sample. However, you can test your water for hardness at your home or in your pool using a water hardness test kit. Does this Spark an idea?
Instructions
-
How to Test for Water Hardness
-
1
Purchase a water hardness test kit at your local hardware or swimming pool store. Inside are two vials filled with liquid, one labeled GH (for general hardness) and the other KH (carbonate hardness). There also will be two empty tubes within the kit.
-
2
To test your home's water, fill the empty tube with tap water. Fill it only to the "test" line. Put two to three drops of the GH liquid into the water. Allow the drops to settle and view the results. The test tube is designed to show you if the GH level in your water is too high or low.
-
-
3
Take the other empty tube and fill it with tap water. Repeat step two using the KH liquid. Check the results to determine if the KH is too high or low.
-
4
Once you have determined whether or not your water is hard, you can decide what action to take if necessary, such as buying a water softener to remove hardness.
-
1
References
More Like This
Comments
-
nice
-
markj99
May 02, 2010
This is a reasonable procedure for getting a general idea about the amount of calcium hardness in water. So good job, and thanks! But you should explain that this is a QUALITATIVE, not a quantitative relationship. This means that relative comparisons are possible, like "More suds means less hardness". But absolute comparisons are not possible. So it's incorrect to say something like "20% more suds means there's 18% less hardness".
