How to Break Up a Cast-Iron Tub


If your bathroom remodeling plans call for a new bathtub, you may be wondering how you're going to get that old cast-iron one out of the bathroom. Weighing in at 300 pounds, it's far too heavy to gracefully lift out of its alcove and maneuver through the door and down the stairs. The answer is to break it up with a sledgehammer. Cast-iron is brittle, and several well-placed whacks with a heavy sledgehammer will shatter it into manageable pieces. This is a messy job, but it gets the old tub out without sacrificing anyone's back or knees.

Things You'll Need

  • Reciprocating saw
  • Wrench
  • Screwdriver
  • Moving blanket
  • Goggles
  • Gloves
  • 20-pound sledge hammer
  • Turn off the water to the tub, open the faucets and let the water drain. Cut the water pipes with a reciprocating saw. Unscrew the faucet from the side of the tub with a wrench and remove it. You should also remove enough drywall from the walls to which the tub is attached to expose the tub flanges.

  • Go underneath the tub and cut through the P-trap to disconnect the tub from the drain. Unscrew and remove the drain. If the tub has a trip lever for a pop-up stopper, go back upstairs, unscrew the lever cover from the side of the tub with a screwdriver and pull out the linkage.

  • Cover the tub with a moving blanket. This prevents shards of metal from flying around the room and injuring someone. Put on a pair of goggles and protective gloves and get your 20-pound sledgehammer out of the tool shed. If you only have a mini-sledge, rent a full-sized one -- you'll need the extra weight.

  • Strike the first blow on the side of the tub. If the metal doesn't shatter, keep swinging until it does. Move over to the other side of the tub and strike the inside of it until the metal on this side shatters. Strike the bottom of the tub next -- the tub should crack and split in two.

  • Break each of the sections into two pieces by striking the ends of the tub until the metal shatters and then hitting the bottom of the tub. Once the tub is broken into four pieces, you should be able to haul it away.

Tips & Warnings

  • Dispose of the tub by taking it to a scrap metal dealer. Bag up all the shards and small pieces and sell them along with the tub.
  • Once the metal shatters, the edges are sharp. Wear protective gloves when handling both large and small pieces of the tub.

Related Searches


  • Photo Credit Umkehrer/iStock/Getty Images
Promoted By Zergnet


You May Also Like

  • How to Remove a Cast Iron Tub

    Removing a cast iron tub without professional help is a strenous job. Since these tubs weigh at least 300 pounds, it requires...

  • How to Recycle an Old Cast Iron Bathtub

    Whether your cast iron bathtub looks old and outdated or you want to install a large garden tub in your bathroom, you...

  • How to Remove A Cast Iron Bathtub

    Some people treasure cast iron bathtubs, but as the finish wears down, they can transform into rusty eyesores. Claw-foot tubs are a...

  • How to Break Cast Iron

    Bath tubs, plumbing pipes and skillets are a few of the products manufactured with cast iron. Cast iron's strength and reduced frictional...

  • How to Tell if Your Tub Is Cast Iron

    Bathtubs come in a number of different materials. From lightweight fiberglass tubs to heavy cast iron to stainless steel, tubs are made...

  • How Can I Break a Cast-Iron Bathtub?

    Some bathtub, especially those in older homes and buildings, are made of cast iron, which is a heavy molded metal. Traditionally, claw-foot...

  • The Best Way to Remove a Cast Iron Bathtub

    Removing a cast iron bathtub in pieces can save time, money and your back, as cast iron bathtubs weigh upwards of 300...

  • Steel vs. Cast-Iron Bathtubs

    Choosing a new tub for your bathroom renovation or new home is an important decision. Your tub must be durable, affordable and...

Related Searches

Check It Out

22 DIY Ways to Update Your Home on a Small Budget

Is DIY in your DNA? Become part of our maker community.
Submit Your Work!