How to Calibrate Vernier Calipers


Vernier calipers are a highly accurate measuring device that gauges to the thousandth of an inch the distance between two symmetrical sides opposing one another on an object. What makes a Vernier caliper unique from other types of calipers is the inclusion of a vernier scale which enables these calipers to be even more precise. In order to ensure precision of measurements, it is important the calipers be maintained by calibrating them regularly and carefully.

Things You'll Need

  • Cloth Paper pencil 12.7 mm block 25.4 mm block 101.6 mm block
  • Clear the caliper jaws and track of grease, dirt or any other foreign matter by wiping them completely clean with a cloth.

  • Ensure that the gear glides smoothly across the tracks by moving it back and forth.

  • Close the jaws together and note the reading at this time. The dial should read zero. If it doesn't, manually adjust the dial to zero.

  • Check the OD jaws first by inserting a .500-inch (12.7 mm) gauge block in between the caliper jaws. Close the caliper so that both jaws are touching the block. Record the reading.

  • Repeat step 4 with a 1-inch (25.4 mm) gauge block and then a 4-inch (101.6 mm) block. Record both readings.

  • Repeat step 4 using the appropriate size micrometer standard (150, 200 or 300) as well. Record this reading.

  • Check the ID jaws by setting the calipers to 12.7mm and locking them into place. Measure the jaw width with another pair of calibrated calipers. Record the reading.

  • Repeat step 7 for 25.4 mm and 101.6 mm settings as well as for the appropriate length of caliper, either 150, 200 or 300. Record these readings.

  • Perform a height check by setting a 12.7 mm gauge block onto the surface plate. Extend the caliper above the block and then close it until it is just touching the block. Record this reading.

  • Repeat step 9 for both 25.4 and 101.6mm gauge blocks. Place the correct size micrometer standard onto the surface plate and extend the caliper above it. Then close the caliper until it is just touching it. Record all of the readings.

Tips & Warnings

  • Performing at least three readings for each check will allow you to calculate any imprecision.

Related Searches

Promoted By Zergnet


You May Also Like

  • What Is the Procedure to Calibrate Digimatic Calipers?

    Digimatic calipers must be calibrated using precision gauge blocks often to ensure overall accuracy as small fluctuations in final machined dimensions can...

  • Calibration Standards for Calipers

    A caliper is a simple device used for measuring the distance between two points on an object. There are a number of...

  • How to Calibrate a Digital Caliper

    Digital calipers provide their users with accurate measurements of everything from hole size and depth, lengths, heights and more. However, as with...

  • How to Calibrate Mitutoyo Calipers

    Mitutoyo calipers are precision measuring devices that need to be calibrated once in a while to give the user an accurate measurement....

  • How to Reset a Mitutoyo Dial Caliper

    A dial caliper is a versatile measuring tool that you can use to take several different physical measurements. Measuring outer and inner...

  • How to Calibrate a Dial Caliper

    Calipers help operators measure tight dimensions accurately, which is critical to the overall integrity of parts in many manufacturing and construction-related industries....

  • How to Disassemble a Dial Caliper

    Dial calipers are an integral tool used in today's manufacturing environment. They are used to measure components and parts to ensure dimensions...

  • Principles of Vernier Caliper

    Vernier calipers are a tool from the caliper family allowing users to measure the inner or outer dimensions of items, and step...

Related Searches

Check It Out

22 DIY Ways to Update Your Home on a Small Budget

Is DIY in your DNA? Become part of our maker community.
Submit Your Work!