How to Replace a Bathtub Faceplate

Save

You've decided to revamp the look of your bathroom, and the bathtub is first on your list. Maybe you'd like to replace the faceplate on your bathtub overflow. The faceplate is the round cover with the drain lever that flips up to plug the drain when filling a bath. Replacing this faceplate with a different style is simple. It's actually one of the easiest do-it-yourself skills to master since it only requires loosening a few screws and swapping one faceplate for another. Once you've done it once, you have a skill for life. Here's how to get started with that new bathtub look.

Things You'll Need

  • Screwdriver New faceplate
  • Unscrew the two screws holding the trip-lever faceplate to the overflow. Make sure to use a properly fitting screwdriver to avoid stripping the screws.

  • Once you have the screws removed, lift the faceplate and assembly from the overflow. Pull the whole assembly out only a few inches, there's no need to pull the whole mechanism out from the hole.

  • Tip the faceplate forward until you can see the backside clearly. You should be able to see a cotter pin holding the assembly onto the faceplate.

  • Remove the cotter pin from the linkage arm. Slide the faceplate off.

  • Take the faceplate to the hardware store and buy a comparable model. Reinstall the faceplate by following the same steps backward.

Related Searches

Promoted By Zergnet

Comments

You May Also Like

Related Searches

Check It Out

22 DIY Ways to Update Your Home on a Small Budget

M
Is DIY in your DNA? Become part of our maker community.
Submit Your Work!