Wood is treated when it will be touching moist ground for any given period of time. The moisture in the wood is a breeding ground for bacteria, fungus and insects, so wood needs to be treated to prevent these harmful infestations. The wood is treated by immersing it into a liquid preservative and placing it in a pressure chamber. The pressure in the chamber forces the chemicals deep into the structure of the wood. Treated wood contains harmful chemicals so gloves and masks are highly advisable when handling it. If you've painted treated wood and want to remove the paint, you have a few options.
Things You'll Need
- Fine abrasive sandpaper Paint stripper Rag Scraper Sand blaster
Lightly sand the paint off of the treated wood. Use a fine abrasive sandpaper and gently rub the painted area back and forth until the paint disappears. Do not sand too hard or you will remove some of the wood underneath.
Use a brush to apply a 1/16-inch layer of paint stripper to the paint on the treated wood. Paint strippers can be found at hardware or lumber stores.
Let the paint stripper sit on the paint for 1 to 8 hours or until you see the paint rise. This usually happens within 1 hour. If after 2 hours the paint still hasn't risen, cover the area with a thin plastic sheet and let it sit overnight.
Remove the risen paint with a rag, a high pressure hose, a vacuum, a brush or a scraper. Whatever method you choose to collect the risen paint, make sure to dispose of it according to government regulations.
Tips & Warnings
- There are a few other solvents that can be used to remove paint off of treated wood, including turpentine, gasoline, Varsol and mineral spirits. Try the solvent on a small area first to see if it works and to determine how well it reacts to the chemicals in the wood. Sand blast the treated wood as another alternative but only if your wood is out in an open area and the other options failed to work. Use a fine sand and only increase the air pressure as needed. Avoid removing quality wood with the paint.
- Do not use water on the treated wood after taking the paint off. It is not necessary to rinse afterward.
- Photo Credit http://static.howstuffworks.com/gif/treated-lumber-1.jpg
How to Strip Deck Paint
How to Strip Deck Paint. Give your deck a face-lift that will make a huge visual improvement. Stripping off old finishes like...
How to Take Off the Paint From a Wood Chair
Taking paint off a wood chair yourself is not as easy as dropping it off at a professional paint removal service. It's...
How to Paint Treated Wood for a Deck
Pressure treated lumber is one of the top sellers in back yard decking materials. While it is inexpensive, easy to work with...
How to Sand Paint Off of a Deck Floor
Your deck provides an outdoor gathering place in seasonable weather, but painted deck boards can age and the paint can peel over...
How to Sand Pressure Treated Lumber
Pressure treated lumber is wood treated with chemicals that keep it from deteriorating. It is used when a structure's framing must touch...
How to Sand Paint From Wood
Wooden furniture or cabinets are often painted to match the decor of the room in which they are located. When you change...
Can I Sandblast Paint on Wood?
When you're remodeling part of a house or piece of wooden furniture, adding a new coat of paint or a fresh finish...