How to Install a Linksys Wireless Card
The LinkSys wireless card is used to connect individuals to the world of the Internet. This card bridges the gap between connectivity and mobility, enabling you to connect to the Internet from anywhere. Whether you're at work in the office, at lunch, or just at home, this wireless card grants you access to the digital world. It enhances the quality and speed of your internet connection's performance by providing a larger range for connection and stronger wireless signals.
- Difficulty:
- Moderately Easy
Instructions
-
-
1
Go to the LinkSys homepage. When the landing page loads, click "Support" located on the main menu of the page. The next screen will load with a search bar that will prompt you to enter your model or serial number. Enter your information accordingly. The serial number should pop up automatically after entering only a few of the necessary characters. Click on the model or serial number to proceed.
-
2
Click "Get Downloads" when the next page loads. It will appear as a subtitle under the "Downloads and Drivers" category on the product's main page. Next, select your product's version number. The page will quickly refresh. Then scroll down the page and locate "Drivers and Downloads" on the left side of the screen. Under "Firmware," click "Download" to begin the installation.
-
3
Click "Save" when the File Download popup screen appears. Save the file location exactly where the computer prompts you to. This ensures that your files and properties will be located in the proper folder for later ease of access. Click "Save" again to close the Windows Explorer screen.
-
4
Extract the .zip file and click "Setup." The LinkSys Software InstallShield Wizard will appear. When prompted to allow the software access to your hard drive, click "Allow" to continue. The installation will begin. Once the setup is complete, you will be asked to agree to the License Agreement and Terms of Agreement. Click "I Agree" and the InstallShield Wizard will reappear and indicate that the setup is complete.
-
5
Go to your "Start Menu" located on your computer's desktop. Access your Control Panel and click "Network and Internet". (This may be worded differently depending on your operating system.) Go to the "Network Sharing Center" and click "Add a device to the network." Insert your LinkSys Wireless Card and wait for the computer to detect the device. When the device is detected, a link to the device will appear. Click the link to configure the connection.
-
6
Go back to the Control Panel window and click "Connect to a Network" located under "Network and Internet." All of your possible connection networks will appear. The LinkSys Wireless Card should appear. Click on the link and wait while the computer's wireless signal connects to the network. You will receive a final indication when the network connection is successful.
-
1
Tips & Warnings
Make sure your computer has a wireless router or connection before trying to connect to a network. For more detailed information or troubleshooting resolutions, refer to your user manual or the LinkSys website.
Make sure your computer meets the minimum operating, performance, compatibility requirements before installing the wireless card. The minimum requirements should be listed on your wireless card's online information page. Do not install the device into more than one USB port. Multiple installation can cause problems indicating that the installation may be incorrect or not configured properly. Try not to alter the network configurations and settings. Leave them as they are because these are the recommended settings and they are for the best interest of the connection.
