How to Use the Garmin Nuvi 200W GPS System
After many difficulties getting directions and reading maps, you finally purchased a GPS. The Garmin Nuvi 200W was an obvious choice given its easy touch-screen operation and moderate price. All you have to do now is get it working so that you can begin navigating your way around town.
Other People Are Reading
Instructions
-
Get a Satellite Signal
-
1
Go outside to an open area with no overhead coverage. Trees and other overhanging objects can block the signal.
-
2
Turn on the Nuvi by sliding the power button to the left.
-
-
3
Watch the satellite strength indicator on the upper left of the screen. Once at least one green bar is full, the Nuvi has acquired a signal.
Navigate to your Destination by Entering Address
-
4
Touch the "Where To?" icon. Then select "Address."
-
5
Adjust the state/county/province if needed, then touch "Spell City." Enter the city or zip code and hit "Done."
-
6
Type in the number of the address and hit "Done."
-
7
Enter name of the street and hit "Done." Select from a list of streets if one pops up.
-
8
Select the address, if prompted, and hit "Go!" to get turn-by-turn directions.
Get Directions with the Map
-
9
Use the map to find directions. Go to "Where To?" and "Browse Map."
-
10
Use the "+" and "-" buttons to zoom in or out.
-
11
Touch the desired destination on the map and hit "Save."
-
12
Touch "Go!" to get directions to the location.
-
1
Tips & Warnings
The "Where To?" menu has many other options in addition to entering an address or using a map, such as choosing Points of Interest, entering Coordinates or selecting from your Favorites.
Slide the power button to the right to lock the screen, preventing accidental changes.
Touch the up and down arrows on a given screen to scroll through options.
Adjust the volume by accessing "Volume" in the menu page.
Go to the wrench icon at the bottom of the screen to access tools such as Settings and Help.
